| Project | FKEQU-166 |
| Motor | Cladding Alignment (Quad Motors) |
| Image magnification | 320x |
| Extension modules | Standard configuration: OPM (-50~+26dBm)/VFL (10mW), optional: split-wave OPM |
| Fixture | Three-in-one multifunctional clamp |
| Illumination | Dual LED V-groove lighting |
| Applicable fiber types | Including G651, G652, G653, G655, G657 |
| Fiber cutting length | 6-16mm |
| Splice loss | SM:0.02dB,MM:0.01dB,NZ:0.03dB,NZDS:0.04dB |
| discharge electrode | ≥5000 times |
| Splice mode | 200 welding program presets |
| Heating mode | 80 preset heating programs |
| Automatic heating | Support |
| Welding time | Standard welding time is ≤7 seconds |
| Heating time | Standard heating time ≤18 seconds |
| Return loss | ≥60dB |
| Suitable for heat shrink tubing | 20~60mm |
| Pull test | The pulling force is 1.96N~2.1N |
| Storage | Can store about 1,600 images and 10,000 sets of data |
| Interface | GUI graphical operation interface, equipped with graphical maintenance navigation function |
| Battery capacity | 5200mAh, typical operating times 300 times |
| Language | Multiple display languages available for users to choose from |
| Altitude | Can work at altitudes from 0 meters to 5000 meters above sea level |
| Temperature | -20°C~+50°C |
| Humidity | 0~95% (no condensation) |
| Storage conditions | Relative humidity 0~95%, -40~70℃ |
| Power supply mode | AC100~240V,DC15~19V |
| Boot time | Quick boot in 3 seconds |
| Show | 4.3-inch high-definition capacitive touch screen, dual button/touch control |
| Port | Type-C, USB2.0 (can be used to export data) |
| Size | 207x136x103mm |
| Weight (including battery) | 1550g |
