Product Categories

Fiber Optic Tools And Equipment

[228]

Contact Now

Shenzhen Fongko Communication Equipment Co.,Ltd

Visit Website

City:shenzhen

Province/State:guangdong

Country/Region:china

Contact Person:MrMichael Liu

View Contact Details

Contact Now

China FTTH FTTX Fiber Optic Tools And Equipment Single Core Aligner wholesale

FTTH FTTX Fiber Optic Tools And Equipment Single Core Aligner

Name: FTTH FTTX Fiber Optic Tools And Equipment Single Core Aligner
Brand: Fongko
Price: 1 USD

Ask Latest Price

Video Channel

Brand Name :Fongko

Model Number :FKEQU-023

Place of Origin :China

MOQ :50 Pieces

Price :Negotiatable

Payment Terms :L/C, T/T, Western Union, MoneyGram

Product name :Single-Core Aligner

Application :Telecom Network

Type :Testers &Tools

Key words :Single-Core Optical Fiber Aligne

Weight :580g

Dimensions :120(mm)*75(mm)*60(mm)

Contact Now

Add to Cart

View Product Description

FTTH FTTX Fiber optic equipment tools Single-Core Aligner Single-Core Optical Fiber Aligne

Features

a) Adopt high-quality guide rail, precision-class ceramic V-groove and head, low splice loss, and good consistency.
b) small size, light weight, easy to operate.

Product characteristics

Applicable fiber: 250μm and 900μm fibers; clad-fiber diameter: 125μm;
Splice loss: For 160A, splice loss is not more than 0.05dB; for 160F, splice loss not more than 0.03dB

Operation procedure

1. Turn on the light source and the test instrument 30 minutes in advance, then connect the two devices with bare fiber, and reset the test instrument to zero.
2. Remove the bare fiber used for reset, turn the knob clockwise to adjust the movable end of the aligner to the farthest
position.
3. Connect the FC head of the tested pigtail to the tester, and clamp the other end with a single-core fixture. Adopt stripping pliers , clean the bare fiber and the standard cutter in turn. After cutting, place it on the fixed end (left end) of the
single-core fiber aligner, and insert the bare fiber accurately into the V groove.
4. Clamp the single fiber of the device under test with a single-core fixture, adopt the stripper, clean the bare fiber and the
standard cutter, after cutting, place it on the movable end (right end) of the single-core fiber aligner, and insert the bare
fiber accurately into the V groove. Drop a little matching liquid in the middle of the V groove, and then close the upper
cover plate. Note: Steps 3) and 4) require to cut the optical fiber into a fixed length, otherwise the test data may be
unstable.
5. Turn the knob counterclockwise, allowing the movable end to move freely to automatically connect the optical fiber in the Vgroove, and then observe the test instrument to inspect each indicator of the tested device.